GE Profile JP968BC Product Information

Specification Created 3/01TMJP968BC/CC/SC/WC—GE Profile™ 36" Built-In CleanDesign CooktopCounter Installation (in inches) Cooktop Dimensions (in inches)Electrical junctionbox 16" MIN.below countertop30" MIN. tounprotectedcabinetCut shouldnot interferewith cabinetstructure atfront1-3/4" MIN.clearance toside wallfrom cut-out1-1/2" MIN.clearance toside wallfrom cut-out18" MIN.to cabinet1-3/4" torear wall13" MAX.depth†Note: Check local codes for required breaker sizeNote: If installing with a GE Profile Performance™ or GE Profile™ Telescopic DowndraftSystem, consult both cooktop and downdraft installation instructions packed with productbefore installing. Cooktop gas/electric supply may needto be re-routed to install downdraft.Note: Consult cabinet and countertop manufacturer’s specs for flush mount installationprior to install.Installation Information: Requires a 5" free area between the bottom of thecooktop to any combustible material, i.e., shelving. Free area not required when installing walloven underneath cooktop. Refer to installation instructions. Requires an 18" minimum fromcooktop to adjacent overhead cabinets. Units are furnished with a 48" flexible armored cable.Before installing, consult installation instructions packed with product for currentdimensional data. 36" Ribbon cooktops are approved for use over GE 30" Single Wall Ovensonly. 30" Ribbon cooktops are approved for use over select GE 29" and GE 30" Single WallOvens. Refer to cooktop and wall oven installation instructions packed with product forcurrent dimensional data.Filler Trim KitWhen replacing an old GE 30" cooktop (with larger opening) with ModelsJP938/930/350/340, use the following one-piece trim kit to fill in the over-size hole.Available at additional cost.JXTR31W (True White)JXTR31B (Black glass with black, white or bisque pattern)Flush Mount Installation KitAccommodates both 30" and 36" installations. Not for use with stainless steel models.JXFLMTW (True white glass)JXFLMBB (Black glass with black, white or bisque pattern)3-1/4*Cooktop2-1/2"Required33-7/819-1/833-13/1619-1/3236** 20-3/8***Depth of unit at conduit location (rear) is 6-1/4"**Stainless steel cooktop dimensions are36-1/8" (width) and 21" (depth)RListed byUnderwritersLaboratoriesKW Rating240V 9.6208V 7.2Breaker Size40 Amps†For answers to your Monogram,® GE Profile™ orGE appliance questions, visit our website atWWW.GEAppliances.com or callGE Answer Center® service, 800.626.2000.

/ 2

Related manuals for GE GE Profile JP968BC