For answers to your Monogram ® or GE® appliancequestions, visit our website at geappliances.comor call GE Answer Center ® service, 800.626.2000.220560†Note: Check local codes for required breaker sizeImportant: Requires a 5" free area between thebottom of the cooktop to any combustible material,i.e., shelving. Free area not required when installingwall oven underneath cooktop. Refer to installationinstructions. Requires a 15" minimum from cooktop toadjacent overhead cabinets. Units are furnished with a48" flexible armored cable.Note: 36" Ribbon cooktops are approved for use overGE 30" Single Wall Ovens and Warming Drawers only.Refer to cooktop and wall oven/warming drawerinstallation instructions packed with product forcurrent dimensional data. If installed with a GEProfile™ Telescopic Downdraft System, consult both thecooktop and downdraft installation instructions packedwith product before installing. Cooktop gas/electricsupply may need to be re-routed to install downdraft.The countertop must be at least 26" deep with aflat surface area of 23-1/2" or more,front to back. Inaddition, other clearances to the front edge of thecountertop must be considered, especially on raisedbullnose countertops. Consult cabinet and countertopmanufacturer’s specs for flush mount installation priorto install.Installation Information: Before installing, consultinstallation instructions packed with product for currentdimensional data.3-1/4*Cooktop2-1/2**Required33-7/819-1/836PHP960DMPP975BMPP962EH/TM/BMJP656DD20-7/8* Depth of unit at conduit connection location (rear)is 6-1/4" on models PP975/945 and 4-3/16" onmodels CP350/650, PP944/962/932/912, andJP656/356/336. Depth of unit at baffle (front) is4-5/8" on models PHP960/900.**Raised bull nose countertops may require up to3/8" additional clearance to prevent interferencewith curved front.Electrical junctionbox 16" MIN.below countertop30" MIN. tounprotectedcabinetCut should not interferewith cabinet structureat front1-1/2" MIN.(30" cooktop)2" MIN. (Inductionand 36" cooktops)clearance to sidewall from cut-out1-1/2" MIN.(30" cooktop)2" MIN. (Induction and36" cooktops) clearanceto side wall from cut-out15" MIN.to cabinet1-3/4" torear wall13" MAX.depthSpecification Created 2/14PP962EHGE Profile™ Series 36" Built-In CooktopDimensions and Installation Information (in inches)KW Rating240V 9.4208V 7.1Breaker Size240V 40 Amps †208V 40 Amps ††Note: Check local codes forrequired breaker size