GE Profile PDW8100 Series Owner's Manual

Also see for Profile PDW8100 Series: Owner's manual Owner's manual Owner's manual Owner's manual Owner's manual

Contents

4Operating Instructions Safety InstructionsConsumer Support Troubleshooting TipsAbout the dishwasher control panel.You can locate your model number on the tub wall just inside the door. Throughout this manual, features and appearancemay vary from your model.Control SettingsStatus Indicator Lights (Indicators vary by models)The Status display tells you what is happening while the dishwasher is in operation and may flash,indicating a malfunction. The lights will come ON indicating the sequence of the dishwasher operation.SENSING Displayed while the ExtraClean™ Sensor is measuring the amount of soil and temperature of water.The dishwasher will adjust the selected cycle to achieve optimal performance.ADD-A-DISH Displayed during prewash indicating that dishes added now will still be cleaned.WASHING Displayed during prewash, main wash and rinse periods.RINSING Displayed during rinse periods.DRYING Displayed during HEATED DRY.SANITIZED Displayed when cycle has met sanitization conditions.CLEAN Displayed when a wash cycle is complete and enhancements are complete.Time Remaining Display (on some models)During operation, the display shows the minutes remaining until the cycle is complete. The displaymay adjust the remaining time while the Sensing light is on. During a delay start, the display will showhours of time remaining until the cycle starts.SelectionsPDW8100–PDW8800 Series: Press the pad for the desired wash cycle.PDW9200–PDW9800 Series: Use the Arrow Pads to scroll through the wash cycles.The light above or next to the selected pad will be ON to indicate which WASH CYCLE has been selected.ANTI-BACTERIA Heavy 10.0 gal., 93 min.(on some models) Medium 8.6 gal., 90 min.Light 7.2 gal., 90 min.This cycle raises the water temperature in the final rinse to sanitize your dishware. The cycle lengthwill vary depending on the temperature of your inlet water.NOTE: The Anti-Bacteria cycle is monitored for sanitization requirements. If the cycle is interruptedduring or after the main wash portion or if the incoming water temperature is so low that adequatewater heating cannot be achieved, the sanitizing conditions may not be met. In these cases, thesanitized light will not illuminate at the end of the cycle.NOTE: NSF-certified residential dishwashers are not intended for licensed food establishments.321123 456562 431PDW8100–PDW8800 SeriesPDW9200–PDW9800 Series