GE Profile PT920DR Dimensions And Installation Information

Also see for Profile PT920DR: Owner's manual Dimensions and installation information

Listed byUnderwritersLaboratoriesFor answers to your Monogram,® GE Profile™ orGE® appliance questions, visit our website atge.com or call GE Answer Center ® service,800.626.2000.Specification Created 5/10220249PT920DRGE Profile™ 30" Built-In Single Convection Wall OvenKW Rating240V 3.8208V 2.8Breaker Size240V 20 Amps208V 20 AmpsMost 30” Wall Cabinets can be used with this unit.Note: These ovens are not approved forstackable installations. Cabinets installedadjacent to wall ovens must have an adhesionspec of at least a 194°F temperature rating.Door handle protrudes 3" from door face. Cabinetsand drawers on adjacent 45° and 90° walls shouldbe placed to avoid interference with the handle.Electric wall ovens are not approved forinstallation with a plug and receptacle. Theymust be hard wired in accordance withinstallation instructions.Installation Information: Before installing, consultinstallation instructions packed with product forcurrent dimensional data.Side-by-side installations require at least 2"between cutouts.Suitabbracinto supporunneCutout width28-1/2'' MIN.28-5/8'' MAX.29-3/4C30Recommendedcutout location32-1/2"from floor21JunctionboxlocationAllow minimum of 21'' for clearanceto adjacent corners, drawers, walls, or etc.A=Allow 1" overlap of oven over top and bottom edges of cutout.B=Allow 11/16"–3/4" for overlap of oven over side edges of cutout.C=28-1/4" without trim and 28-3/4" with trim.Conduit48-1/2"527-1/4'' MIN.27-5/16'' MAX.Cutout heightAB23-1/2'' MIN.Cutout depth22'' MIN.CL 2 x 4 orequivalentrunnersSuitablebracingto supportrunners21-5/8"over centerlineof cabinet(must support 275 lbs.)Cutout width28-1/2'' MIN.28-5/8'' MAX.30Recommendedcutout location32-1/2"from floor21Junctionboxlocatione, or etc.p and bottom edges of cutout.f oven over side edges of cutout.with trim.Conduit(72"long)527-1/4'' MIN.27-5/16'' MAX.Cutout heightAB23-1/2'' MIN.Cutout depth22'' MIN.Dimensions and Installation Information (in inches)

/ 3

Related manuals for GE Profile PT920DR