SH 1 of 2 31-10982 C2S985 08-14 GEDIMENSIONS AND CLEARANCESProvide adequate clearances between therange and adjacent combustible surfaces. Thesedimensions must be met for safe use of yourrange.Allow 30” (76.2 cm) minimum clearance betweenburners and bottom of unprotected wood ormetal cabinet, or allow a 24” (61 cm) minimumwhen bottom of wood or metal cabinet isprotected by no less than 1/4” (6.4 mm) thickflame-retardant millboard covered with no lessthan No. 28 MSG sheet metal (.015” [.38 mm]thick), .015” (.38 mm) thick stainless steel, .025”(0.64 mm) aluminum or .020” (0.5 mm) copper.Installation of a listed microwave oven orcooking appliance over the cooktop shallconform to the installation instructions packedwith that appliance.For island installation, maintain 2-1/2” minimumfrom cutout to back edge of countertop and3” minimum from cutout to side edges ofcountertop.To cabinetsbelow cooktopand at therange backMinimum tocabinets oneither sideof the range 30”30”Minimum 13”6”Minimumclearance toright wallMaximumdepth forcabinets abovecountertopsFront edgeof the rangeside panelforward fromcabinet 0”To cabinetsbelow cooktopand at therange back6”Minimumclearanceto left wall0”18”1/4”CAUTION To prevent drafts from affecting burner operation, seal all openings in floorunder appliance and behind appliance wall.3” 9” 9/16”4”3”8”3”2”2 41 ”/7 21 ”/30”Recommended areafor through-the-floorconnection of pipestub and shut-off valve.If the countertop has araised edge, shave theraised edge to clearthe control panel asshown below.DIMENSIONS AND CLEARANCES (CONT.)GAS PIPE AND ELECTRICAL OUTLET LOCATIONSRecommended areafor through-the-Wallconnection of pipe stuband shut-off valve.Recommended acceptableelectrical outlet area. Orientthe electrical receptacle so thelength is parallel to the floor.29 1⁄8”Depth with door closed(includes door handle)30”361/4” ± 1/4”*411⁄2”Depth with door open:461⁄4”*Height to backguard based onCafé style backguard kit installed.