GE Side by Side Refrigerators Installation Instructions Manual

Also see for Monogram ZIS360N: Service bulletin Design & installation guide Design & installation guide Installation instructions

Contents

DISPENSER MODELS:RAISED OVERLAY PANEL DESIGNWhen a raised panel design is to be used, acustom wide middle rail is required to acceptthe dispenser trim.• The middle rail must be wide enough to allowfor the dispenser trim to overlap the opening.• The middle rail must be 1.100" total thicknessto accept the dispenser trim.9DISPENSER TRIM FIT EXAMPLES:(NOT TO SCALE)1/4" FRAMED PANEL• The dispenser trim fits over thecustom panel and snaps into thefreezer door.• The clips will not engage the door ifthe panel is more than 0.250" thick.• If the panel is less than 0.250" thick,a noticeable gap may be createdaround the dispenser trim.3/4" OVERLAY PANEL• The dispenser trim fits over thecustom panel and snaps into thefreezer door.• The clips will not engage the door ifthe panel is more than 1.100" thick.• If the panel is less than 1.100" thick,a noticeable gap may be createdaround the dispenser trim.1/4" Backer Panel.10" Spacer3/4" Overlay PanelWideMiddleRail isRequiredDispenserTrim16-3/4"10-5/8"1/4"FramedPanel1/4" Backer Panel.10" SpacerPanel1/4" Dispenser Trim3/4" Overlay Dispenser Trim3/4" OverlayPanelFREEZER DOORFREEZER DOOR0.250"Thick1.100"Total ThicknessIce / Water DispenserIce / Water DispenserDesign Guide