How to load your dishwasher How toload the ‘lXIPRACKThis is a random mixed load, the most common type youmullhave.Make sure dishes are properly loaded to insure thatwater can reach the soiled surfaces. The wash arm in thebottom sprays water up. The tower that rises in thecenter sends water out over the dishes to wash the itemsin the upper rack.WATCHOUT FOR THIS.The wash tower rises through the center of the bottomrack during the wash and rinse portions of the cycle.Don’t block it or load tall things next to it. Also, becareful not to let a portion of an item such as a pot ordish handle extend through the bottom rack. This couldblock the wash arm and cause poor washing results.8Place tall glasses, mugs, tumblers and stemware in thedeep front section. The shallow rear section is ideal forcooking and serving utensils. Make sure that allitems-front and rear sections—do not extend above theside wires of the rack. Arrange stemware so that itcannot move easily. Don’t let the glasses touch each other.The rack is ideal for dishwasher-safe plastics. Loadsmall shallow items in the rear section; larger, deeperbowls in front section. If loading plastic tumblers indeep front section, be sure that each plastic tumbler issecured over two fingers.