Installation InstructionsA CAUTION: Before plugging ill washer, read the following electrical requirements.ELECTRICAL REQUIREMENTSA CAUTION: Forpersonal safety, donot use an extension cord or adapter plug with thisappliance.Do not, under rely circumstmlces, cut or remove thethird grounding prong from the power cord. FollowNational Electrical Codes or prevailing local codesmad ordinances.This appliance must be supplied with tile voltage andfrequency indicated on the rating plate (located on theback of tile washer), and connected to an individual,properly gr(mnded branch circuit, protected by a15 or 20 amp circuit breaker or time-delav fllse.If tile electric supply provided does not meet tile aboverequirements, call a licensed electrician.InsurepropergroundexistsbeforeuseGROUNDING INSTRUCTIONSThis appliance inust be grounded. In tile event ot amalflmction or breakdown, grounding will reducethe risk of electric shock by providing a path of leastresistance tot electrical current.This appliance is equipped with a cord having anequipment gr(mnding conductor and a gro/mdingplug.The plug nlust be plugged into an ai)i)ropriate outletthat is i)roperly installed and gro/mded in accordancewith all local codes and ordinances.A DANGER: hnl)rol)er connection oftheequipment-grounding conductor can result in a risk ofelectrical shock. Check with a qualified electrician ifyou are in doubt as to whether tile appliance isproperly gro/mded.Do not m()dit_' plug with this appliance; if it will not fitthe outlet installed, have a proper outlet installed bv aqualified electrician.LEVELING THE WASHER--STATIONARY MODELSBefore connecting tile hoses, tile washer must be lexel.I exelino locks are located at tile bottom front of tile• 0left and right sides of the washer.I I_MAKE SURE THE WASHER IS IN IITS FINAL LOCATION I[] PULL OUT THE LEVELING LOCKSThis releases tile spring loaded lexelin,*_ feet. Tilewasher will automatically lexel itself.[] PUSH THE LEVELING LOCKSBACK INDonot kickor step on the leveling locks./0