GE ZEK938 27 Owner's Manual
Also see for Monogram ZEK938: Installation instructionsInstallation instructionsTechnical service guideInstallation instructionsInstallation instructions
                                                | |
Contents
| 
40Ovenlight bulbsNOTE: The glass cover should be removed only whencold. Wearing latex gloves may offer a better grip.CAUTION : Before replacing thebulb, disconnect electrical power to the ovenat the main fuse or circuit breaker panel.Be sure to let the light cover and bulb coolcompletely.For your safety, do not touch a hot bulb withbare hands or a damp cloth.To remove:1 Turn the glass cover counterclockwise1/4 turn until the tabs of the glass coverclear the grooves of the socket.2 Using gloves or a dry cloth, remove the bulbby pulling it straight out.To replace:1 Use a new 130-volt Halogen bulb, not toexceed 50 watts.2 Using gloves or a dry cloth, remove the bulbfrom its packaging. Do not touch the bulbwith bare fingers.3 Push the bulb straight into the receptacleall the way.4 Place the tabs of the glass cover into thegrooves of the socket. Turn the glass coverclockwise 1/4 turn.For improved lighting inside the oven, clean the glasscover frequently using a wet cloth. This should bedone when the oven is completely cool.5 Reconnect electrical power to the oven.Probe The temperature probe may be cleaned withsoap and water or a soap-filled scouring pad.Cool the temperature probe before cleaning.Scour stubborn spots with a soap-filled scouringpad, rinse and dry.Do not immerse the temperature probe in water.Do not store the temperature probe in the oven.Care and CleaningWall OvenBulbSocketTabGlass coverReceptacleUse glovesor clothReceptacle |
Related manuals for GE Monogram ZEK938
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine