GE jgbp36demww Owner's Manual & Installation Instructions

Also see for Appliances RGB790: Owner's Manual & Installation Instructions Owner's manual and installation instructions Owner's manual and installation instructions Owners and installation manual Installation and owner's instructions

Contents

GE jgbp36demww Owner's Manual & Installation Instructions Manual pdf 12 page image

Operating Instructions12Safety InstructionsInstallationInstructionsTroubleshooting TipsConsumer SupportBake/Temp Recall PadTouch this pad to select the bake function.Bake LightFlashes while in edit mode—you can change theoven temperature at this point. Glows when theoven is in bake mode.Start/On PadMust be touched to start any cooking or cleaningfunction.DisplayShows the time of day, oven temperature,whether the oven is in the bake, broil or self-cleaning mode and the times set for the timeror automatic oven operations. The display willshow PRE while preheating. When the ovenreaches the selected temperature, the ovencontrol will beep and the display will show theoven temperature.If “F– and a number or letter” flash in the display andthe oven control signals, this indicates a function errorcode.If your oven was set for a timed oven operation and apower outage occurred, the clock and all programmedfunctions must be reset.The time of day will flash in the display when there hasbeen a power outage. Reset the clock.On models with an oven door latch, if the function errorcode appears during the self-cleaning cycle, check theoven door latch. The latch handle may have been moved,even if only slightly, from the latched position. Make surethe latch is moved to the right as far as it will go.Touch the Clear/Off pad. Allow the oven to coolfor one hour. Put the oven back into operation. If thefunction error code repeats, disconnect the powerto the range and call for service.Kitchen Timer On/Off PadTouch this pad to select the timer feature. Thenpress the + and – pads to adjust the timer.Kitchen Timer LightFlashes while in edit mode—you can change theset time at this point. Glows when the timer hasbeen activated. Flashes again when the time hasrun out until the control is reset.Clock PadTo set the clock, press this pad twice and thenpress the + and – pads. The time of day willflash in the display when the oven is firstturned on.Start Time PadUse along with the Cooking Time or Self Cleanpads to set the oven to start and stopautomatically at a time you set.Start Time LightFlashes while in edit mode—you can change thestart time at this point. Glows when the functionhas been activated.Cooking Time PadTouch this pad and then touch the + or – padsto set the amount of time you want your foodto cook. The oven will shut off when the cookingtime has run out.Cooking Time LightFlashes while in edit mode—you can change theset time at this point. Glows when the functionhas been activated. Flashes again when the timehas run out until the control is reset.Throughout this manual, features and appearance may vary from your model.Using the oven controls.Oven Control, Clock and Timer Features and Settings (on some models)