GE monogram ZGU36K Owner's Manual

Also see for Monogram ZGU36K: Owner's manual Owner's manual Owner's manual Owner's manual

Contents

GE monogram ZGU36K Owner's Manual Manual pdf 17 page image

Glass Cooktop Surface CleaningGas CooktopNormal doilguse cleaningONLYuse CERAIVlABRYTE®Ceramic CooktopCleaner on the glass cooktop. Other creams maynot be as effective.To maintain and protect the surface of your glasscooktop, follow these steps:Before using the cooktop for the first time,remove the burner grates and clean the cooktopwith CERAIVlABRYTE'_Ceramic Cooktop Cleaner.This helps protect the top and makes cleanupeasier..3.Daily use of CERAMABRYTE®Ceramic CooktopCleanerwill help keep the cooktop looking new.Shakethe cleaning cream well. Apply a few dropsof CERAMABRYTE®Ceramic Cooktop Cleanerdirectly to the cooktop.4. Use a paper towel or CERAIVlABRYTE®CleaningPad for Ceramic Cooktops to clean the entirecooktop surface.5. Use a dry cloth or paper towel to remove allcleaning residue. No need to rinse.NOTE: It is very important that gou DO NOT heatthe cooktop until it has been cleaned thoroughlg.Clean gour cooktop after eachspill. Use CERAMABRYTE®Ceramic Cooktop Cleaner.Burned-onresidue A| II I^lIlkl I kit "I:I, Vl//-llIl_l I I_l la : DAMAGEto your glasssurface may occur if you use scrub pads otherthan the pad included with your cooktop.-ZI,AVERTISSEMENT:Vous pouvez ENDOIVlMAGERvotre surface envitroc6ramique si vous utilisez des 6ponges der6curage autres que celles comprises avec votreappareil.1. Allow the cooktop to cool.2. Remove the burner grates. Spread a few dropsof CERAIVlABRYTE®Ceramic Cooktop Cleaner onthe entire burned residue area.3. Using the included CERAIVlABRYTE®CleaningPad for Ceramic Cooktops, rub the residue area,applying pressure as needed.4. If any residue remains, repeat the steps listedabove as needed.5. For additional protection, after all residue hasbeen removed, polish the entire surface withCERAIVlABRYTE®Ceramic Cooktop Cleaner and apaper towel.Use a CERAMABRYTE® CleaningPad for Ceramic Cooktops.Heavg,burned-onresidue.2.3.Allow the cooktop to cool.Remove the burner grates. Use a single-edgerazor blade scraper at approximately a 45 °angle against the glass surface and scrapethe soil. It will be necessary to apply pressureto the razor scraper in order to remove theresidue.After scraping with the razor scraper, spread afew drops of CERAIVlABRYTE®Ceramic CooktopCleaner on the entire burned residue area. Usethe CERAMABRYTE®Cleaning Pad to removeany remaining residue.4. For additional protection, after all residue hasbeen removed, polish the entire surface withCERAIVlABRYTE®Ceramic Cooktop Cleaner and apaper towel. /The CERANA BRYTE"Ceramic CooktopScraper and all recommended suppliesare available through our Parts Center.See instructions under "To Order Parts"section on next page.NOTE: Do not use a dull or nicked blade.17