GEA HG34P Maintenance Manual

Also see for HG34e: Assembly instructions Assembly instructions

Contents

GEA HG34P Maintenance Manual Manual pdf 19 page image

1996194-05.2016-Gb4 I Checking the compressor partsOther components have to be examined according to the following criteria:Cylinder linersThe cylinder liners should not have any visible damages in the piston movement area.If there is fluting, the casing should be replaced.CrankshaftThe bearing surfaces should not have any damages. The oil channels should be clean so that anunhindered oil flow is ensured.Clean the oil channels with compressedair and check for passagePiston - cylinder bore 0,13 mmConnecting rod - piston pin 0,03 mmCrankshaft - connecting rod 0,08 mm123123Checking compressor parts for damages and wearBefore re-using removed compressor parts we recommend that they be checked for usability.The wear limits listed below should be taken into consideration:FE1234FECAUTION! Remaining oil can cause eye injury!When compressed air is used, remaining oil can splash out of the oil channels.Wear protective googles.Compressed air