Gaggenau BX 281 Instruction Manual

Also see for BX 280: Instruction manual Installation instructions

Gaggenau BX 281 Instruction Manual Manual pdf 38 page image

38Delaying the Switch-off TimeIf you want the pyrolysis to run at a later time (forexample during the night), you can change theswitch-off time. In this way you can use your ovenduring the day as usual.Make the settings as described in 1 and 2.3 Press the d key to change the switch-off time.4 Press the b key to confirm.After confirmation the F symbol appears on thedisplay. The status bar shows the switch-off time ofthe pyrolysis. Three dashes instead of thetemperature are shown on the display. After thestart of the pyrolysis the temperature appears onthe display.A signal is sounded at the switch-off time.Exception: There is no signal between 22.00 and8.00.The pyrolysis has ended. Switch off thetemperature knob.Allow the oven to cool down fully. Then wipe out theoven using a moist cloth.NoteThe duration of the pyrolysis cannot be changed.During pyrolysis the appliance cooling fan might belouder than usual.If the pyrolysis does not start and the G or rsymbol flashes on the display:Check if the door is fully closed and the meat probehas been removed.If you want to stop the pyrolysis:Switch off the temperature knob.For your safety the oven door remains locked. Thedoor is automatically unlocked when the oven hascooled down and the o symbol disappears.16:30---21:0003:0013:30