Gaggenau EB 333 Installation Instruction

Also see for EB 333: Instruction manual Use and care manual

Contents

7Install ApplianceNote: The appliance is heavy. It is advisable to install itwith a second person.NOTICE: Before installing the appliance, be sure toverify the cabinet dimensions and electricalconnections.Mount to Cabinet1 Push the appliance fully into the cabinet recess.Do not kink or trap the connecting cable, or route itover sharp edges.2 Remove the transportation lock from the door.Centre the appliance.There must be an air gap of 3 / 16 " (5 mm) betweenthe appliance and adjacent cabinets.3 Using a spirit level, adjust the appliance so that it isperfectly level.4 Secure the appliance at the top on both sides usinginto the two screws provided.Electrical Installation1 Connect red wire from oven to red electrical supplywire (hot wire).2 Connect black wire from oven to black electricalsupply wire (hot wire).3 Connect white wire from oven to white electricalsupply wire (neutral).4 Connect yellow/green ground oven wire toelectrical supply ground wire.Attach flexible conduit to the junction box.To facilitate serviceability, the flex conduit must not beshortened and should be routed to allow for temporaryremoval of the oven.Check the Installation9 WARNINGBefore you plug in an electrical cord or turn onpower supply, make sure all controls are in theOFF position.Switch on the circuit breaker.Verify that elements function properly.Removal1 Disconnect the appliance from the power supply.2 Undo the fastening screws.3 Raise the appliance slightly and pull it outcompletely.