Gaggenau EM 220/221 Operating And Assembly Instructions Manual

Also see for EM 220: Operating and assembly instructions

Technical dataTotal connected load: 220-240 V AC, 16 AHeating power:Grill: 1 800WTotal output: 3 600WTechnical modifications without notice.Installation notesPay attention to Chapter 1 (Important notes).The appliance must only be connected by anauthorised specialist, paying attention to therelevant regulations of the power supply companiesand the regional construction regulations.The installing technician is responsible for thecorrect functioning of the appliance at the time ofinstallation. He must instruct the user on how todisconnect the appliance in an emergency.We accept no liability for damage caused by failureto comply with these instructions.The appliance must always be disconnected fromthe mains when being repaired or in an emergency.To do this, remove the mains plug or switch off thecorresponding fuse.Repairs and maintenance work must be carried outby trained after-sales technicians.Electrical connection rates and information on therating plate must agree with each other.The wiring schematic that is placed on the outerpanel of the appliance shows the connection variantagain.Do not use any extension leads!The electrical safety of the appliance is guaranteedonly if the earthing system belonging to thedomestic installation is installed in accordance withregulations.The manufacturer is not liable for damage thatmight arise as the result of improper or non-existentearthing of the appliance.You can optionally connect the appliance to230 V 1N ~ ~ or 400 V 2N ~ ~ by way of a properlyinstalled socket or junction box.If the appliance is connected to 230V 1N ~ ~ , a 16 Afuse must be installed or, if it is connected to400 V 2N ~ ~ , it must be fused with 2 x 10 A.As standard, the appliance is designed for a ratedvoltage 230V 1N ~ ~ and, in accordance with therating plate, it can be converted for connection to400 V 2N ~ ~ . Insofar as necessary, the regulations ofthe local electricity works must be observed.On installation, an isolating device with a contactgap of at least 3 mm (e.g. fuse or LS switch) mustbe installed. Pay attention to fire protectionregulations in the proximity of heat-sensitive andfire hazard substances.When connecting the mains lead, you must at leastuse a cable of the type H05 VV-F 3 x 1.5 mm 2 .229. Assembly instructions

/ 25

Related manuals for Gaggenau EM 220