Gaggenau RC462704 Instruction Manual

Also see for RC462704: Installation instructions

Gaggenau RC462704 Instruction Manual Manual pdf 14 page image

14en-us Operating the applianceFast coolingFast cooling cools the refrigerator compartment as coldas possible.Switch on fast cooling, e.g.:▯ Before placing large quantities of food into thecompartment▯ For cooling drinks quicklyNote: When fast cooling is switched on, increasedoperating noises may occur.After approx. 6 hours, the appliance switches to normaloperation.Switching on fast cooling:1. To open the menu for setting the temperature, pressÀ button.2. Press Û button.When fast cooling is switched on, the symbol Ûappears on the display.3. The appliance stores the setting and automaticallyreturns to the main screen after a few seconds.Switching off fast cooling:1. To open the menu for setting the temperature, pressÀ button.2. Press ã button.When fast cooling is switched off, the symbol Ûdisappears from the display.3. The appliance stores the setting and automaticallyreturns to the main screen after a few seconds.Eco modeEco mode switches the appliance to energy-savingoperation.The appliance automatically sets the followingtemperatures:▯ Refrigerator compartment: +43° F (6° C)▯ Cool-fresh container: +34° F (1° C)Switching Eco mode on or off1. Press à button to open the main menu.2. Press C button to move to the menu item Eco mode.3. Press I/& button.The temperature is changed, and the display shows thenew temperature. When Eco mode is switched off, therecommended temperature is set.Note: You can also switch Eco mode on or off byadjusting the temperature with A/@ buttons.Self-testThis function can be used to start fault analysis on yourappliance.~ "Appliance self-test" on page 26Setting the brightness of the controlpanel1. Press à button to open the main menu.2. Press B button to move to the menu item Basicsettings.3. Press ™ button.4. Press % button to open the menu item Brightness.5. Press B C buttons to set the required brightness.6. Press ™ button.The setting is saved.7. Press ' button to exit the menu.Setting the display screenYou can choose between the settings Reduced andStandard. With the setting Reduced only the temperatureand active special functions are displayed on the controlpanel after a short period without operation. If the touchfields are touched, all keys will be visible again.With the setting Standard all keys always remain visible.1. Press à button to open the main menu.2. Press B button to move to the menu item Basicsettings.3. Press ™ button.4. Press C button to move to the menu item Displayscreen.5. Press % button.6. Press B C buttons to move to the required setting.7. Press ™ button.The setting is saved.8. Press ' button to exit the menu.