27Noise enCleaning the equipmentTo clean, take the variable parts out of the appliance.~ "Interior fittings" on page 11Ice cube containerCaution!– A full ice cube container is heavy:Pull the container out with both hands.– Risk of cold burns:Avoid prolonged contact of the skin with frozenfood, ice and metal surfaces in the freezercompartment.To ensure you always have fresh ice cubes and toprevent old ones from sticking together, remove themand clean the ice cube container regularly.1 Lift the ice cube container.2 Slowly pull out the ice cube container.3 Empty and clean the ice cube container withlukewarm water.4 Dry off the inside of the ice cube container well sonew ice cubes do not freeze and stick to it.5 Insert the ice cube container until it engages.Note: If the ice cube container cannot be inserted,rotate the conveyor and try again.Drip trayYou can remove the drip tray to clean.1 Remove the drip grate.2 Remove the drip tray.3 Empty and clean the drip tray with lukewarm water.4 Re-insert the drip tray and the drip grate.> NoisesNoiseNormal noisesDroning: A motor is running, e.g. refrigerating unit, fan.Bubbling, buzzing or gurgling: Refrigerant is flowingthrough the tubes.Clicking: Motor, switches or solenoid valves areswitching on and off.Cracking: Automatic thawing successful.Preventing noisesAppliance is not level: Align appliance using a spiritlevel. If required, place a little packing underneath.Containers, shelves or storage compartments wobbleor stick: Check the removable fittings and re-insert ifrequired.9 LightingLightingYour appliance features a maintenance-free LED light.Only customer service or authorised technicians mayrepair the light.