Gaggenau VR 421 Operating And Assembly Instructions Manual

Contents

Gaggenau VR 421 Operating And Assembly Instructions Manual Manual pdf 18 page image

Installing the grillFitting the appliance cover• Firmly plug the connecting cable in the grill and inthe control panel (the plugs must lock into place).• Turn the clamping screws to the side. Insert thegrill with the control panel on the front into thecut-out and align it.Note: do not stick the grill onto the worktop withsilicone.• Turn the clamping screws under the countertopand tighten them evenly. Do not tighten theclamping screws too tightly, as a uniform sealinggap should be left all round.• Connect the appliance to the electricity. Test thatit functions correctly. If the grill does not switch on,check the connecting cable between the grill andthe control panel is firmly plugged in.Fitting the appliance cover• The securing brackets are already fitted on thebase.• Place the appliance cover on the brackets inupright position and screw it down using thepre-mounted grub screws.• Close the appliance cover. It must lie evenly onthe appliance.• If the cover is not fitted straight, loosen the sheetmetal screws again and fit the included shims onthe securing bracket until the appliance cover liesevenly on the panel edge.• Again firmly screw down the appliance cover.Note:do not use the appliance cover as a surface forplacing objects or for keeping things warm. Wipeaway spills before opening the appliance cover.Do not close the appliance cover until theappliance has cooled down completely. Do notoperate the appliance with the cover closed! Thismay damage the appliance and the cover due tothe development of heat.5080009751 en 06.05 EB 17

/ 19

Related manuals for Gaggenau VR 421