Gaggia 10001451 Operating Instructions Manual

Contents

Gaggia 10001451 Operating Instructions Manual Manual pdf 13 page image

ENGLISHDescription of parts:FIG. 011 Main switch2 Coffee dispensing button3 Coffee dispensing button4 Hot water supply button5 Steam button6 Dose programming/Manual dispensingbutton7 Correct temperature light8 Turbo frother steam nozzle (removeable)9 Filterholder10 1 cup filter11 2 cup filter12 Basin (removable)13 “Perfect crema” filter (OPTION)14 Brewing head15 Filterholder gasket16 Shower disc holder17 Shower disc18 Tamper19 Power cable and plug20 Measuring spoon21 Delivery spout22 Tank cover23 Grid (removable)24 Cappuccino maker kit (OPTION)25 Steam/hot water knob26 Removable water tank27 Overflowing protection hole28 Level indicator for the basin29 Coffee pod filterInstructions for the power supply cordA A short power-supply cord is provided toreduce risks of getting tangled up or trippingover a longer cord.B Longer extension cords are available andmay be used if care is exercised in their use.C If a long extension cord is used:1 the marked electrical rating of the extensioncord should be at least as great as the electri-cal rating of the appliance.2 if the appliance is of the grounded type, theextension cord should be a grounding-type3-wire cord, and3 the longer cord should be arranged so that itwill not drape over the counter top portabletop where it can be pulled on by children ortripped over.Preparation:1. Remove the water tank cover (22) and fillwith cold water to the MAX line indicatedon tank (26). See FIG. 2.N.B.: Near the word MAX on the tank there isthe overflowing safety hole (27) in case oftank overfilling.The water tank can also be removed, afterremoving the tank cover (22) using thehandle.Re-install tank with water and cover (22).2. Insert plug (19) into a suitable wall outlet (seepoint 1 under “Caution”).3. Push the main switch (1). The temperaturelight (7) will flash until the temperature isreached; when the temperature is reachedthe light will remain on.The lights of buttons 2 - 3 - 4 - 6 will remainon in a fixed way.Starting upThis procedure fills the water boiler with freshwater.This should be done whenever the machine isswitched on.This machine, featuring a pump to brew coffee,is equipped with a self-priming system.Put an empty cup below the steam frother (8),turn the steam knob (25) clockwise and pressthe hot water supply button (4).You will hear the noise of the enabled pumpand after a few seconds water will come downfrom steam rod (8).When the cup is filled press the hot watersupply button (4) again and close the steamknob (25).The Gaggia machine is now ready to beused.• 9 •