Gaggia 10001800 Operating And Maintenance Manual

Contents

Gaggia 10001800 Operating And Maintenance Manual Manual pdf 30 page image

28 PROGRAMMING THE MACHINEMILK CIRCUIT WASH CYCLETo rinse the machine’s internal circuits used for preparing milk.This cycle is proposed after 14 days from the first dispensing of a milk-based beverage. After 14 days, the “milkcleaning” message starts flashing (see page 13). Perform the wash cycle as described in this section.Select the function bypressing the “milk cleaningcycle” button.coffeecleaningcyclemaintenancedescalingcyclelockdisplaymilkcleaningcyclemilk circuitrinsingcyclego back back tomenuPush the “milk cleaning” button and refer to the instructions below, at step 2. The machine switches to the statusdescribed at point 7.If the milk circuit wash cycle is not performed after 14 days, the dispensing of milk-based beverages will be stillpossible for only 7 more days. After 7 days, the wash cycle must be performed because the dispensing of milk-basedbeverages is disabled. (The machine still enables dispensing hot water and coffee).To remind the user of this important operation, the message “milk cleaning -3” is shown on the display 3 days beforethe deadline and is updated on subsequent days.Before performing this function make sure that:1. a large enough container is at hand.2. the milk container has been adequately cleaned of all milk residue.3. the water tank contains a sufficient quantity of water.THE WASH CYCLE CANNOT BE INTERRUPTED. A PERSON MUST BE PRESENT DURING THE OPERATION.USE ONLY AND EXCLUSIVELY THE PROVIDED DETERGENT.Open the compartment andremove the milk container.Insert the content of thedetergent packet into thecontainer.321milkcleaningshow iconexplanationmy customcoffeeprogram-mingmenumilkcleaning-3show iconexplanationmy customcoffeeprogram-mingmenu