7493257681«AQUA PRIMA» WATER FILTERTo improve the quality of the water you use, and extend the life of your machine at the same time, it isrecommended that you install the “Aqua Prima” water filter. After installation, go to the water filterinitialization program (see programming). By using this program, the machine advises the user when thewater filter must be replaced.Place a container beneath the hotwater spout.Turn the knob until theposition is reached. Waterdispensing begins.Remove the Aqua Prima waterfilter from its packaging. Enter thedate of the current month.Insert the water filter in its placewithin the empty tank (seefigure);Press down until it clicks intoplace.Fill the tank with fresh drinkingwater. Let the water filter soak inthe full tank for 30 minutes forcorrect initialization.onreload waterfilteroff1.2.4 water settingsrinseonwaterhardness3/4water filteroffHave you replaced the old waterfilter with a new one?Access programming (see page18 and 19). Press “water settings”.Press “reload water filter”.Press “water filter”.Press the key to confirm theactivation of the new water filter.1.2.4.2. water filterOnce finished, the “close steam knob” message appears on the display. Turn the knob back to the rest position ( ).Fill the water tank if necessary.The machine is now ready for use and the “Aqua Prima” water filter control is active (see page 21).1.2 machine settingslanguage & displaycup-warmingsurface watersettingsalerts and acousticsettings