Gaggia ANIMA PRESTIGE Operating Instructions Manual

Also see for Anima: Service manual Operating instructions Operating instructions

27Englishreassembling the Milk Carafe1 To reassemble the milk dispensing spout, follow the steps from 2 to 4 in“Disassembling the Milk Dispensing Spout” the opposite way.2 Put the milk dispensing spout back in the upper part of the milk carafe.3 Put the upper part of the milk carafe back in the milk carafe.Note: before putting the milk dispensing spout back in the upper part of themilk carafe, place the pin inside the upper part in its right position. If the pinis not in its right position, you cannot put the milk dispensing spout back inthe upper part of the milk carafe.Monthly Cleaning of the Milk CarafeFor this cleaning cycle, use the “Milk circuit cleaner” for the cleaning of milkcircuits.1 Pour a bag of milk circuit cleaning product in the milk carafe. Fill the milkcarafe using water up to the MAX level indication.2 Insert the milk carafe in the machine and place a container under the milkdispensing spout.3 Press the MENU button, select DrINKS, confirm with the OK button andscroll down to MILK FrOTH. Press the OK button to start dispensing thecleaning solution.4 Repeat step 3 until emptying the milk carafe.5 When the carafe is empty, remove the container and the milk carafe fromthe machine.6 Wash the milk carafe thoroughly and fill it using running water up to theMAX level indication.7 Insert the milk carafe into the machine.8 Place the container under the milk dispensing spout.9 Press the MENU button and select MILK FrOTH in the DrINKS menu tostart the rinse cycle of the carafe.10 Repeat step 9 until emptying the milk carafe.Note: never ingest the solution dispensed at this stage.11 Repeat steps from 6 to 10.12 When the machine does not dispense water anymore, the cleaning cycleis over.13 Disassemble all components and wash them using running water. Themachine is ready for use.