Gaggia VELASCA RI8260 User Manual

Also see for VELASCA RI8260: User manual User manual

AquaClean filter installationYour machine has to be completely limescale-free before you start to usethe AquaClean filter. If you did not activate the filter upon first use andbrewed more than 50 cups (with 100 ml capacity), you need to descale themachine before you activate the filter.1 Remove the AquaClean filter from its packaging. Shake the filter for about5 seconds.2 Immerse the filter upside down in a jug with cold water and wait until nomore air bubbles come out.3 Remove the water tank from the machine and insert the filter verticallyonto the filter connection.4 Fill the water tank with fresh water and slide it back into the machine.5 Press the MENU button and scroll to the AquaClean filter option. Thenpress the OK button to select the AquaClean filter option.If you are installing the filter at first time use, follow the steps in chapter‘First installation’.A Q U ACLEAN0/8ONOFF6 Select ON on the display and confirm the activation by pressing the OKbutton.Note: The display shows a tick icon to confirm the activation.7 To rinse the filter, press the HOT WATER button and let half a litre waterflow out from the hot water/steam dispensing spout. Discard this water.Note: It can take a while until water comes out of the hot waterdispensing spout. The filter needs to be fully filled and rinsed with water.8 Use the sticker attached to the plastic packaging of the AquaClean filterto write down the date of the next filter replacement (after 3 months).Place the sticker on the water tank.The filter and machine are now ready for use.Replacing the AquaClean filterReplace the filter every 3 months or at machine request.11English