Gainsborough K241 Assembly Instruction And Instructions For Use

Gainsborough K241 Assembly Instruction And Instructions For Use Manual pdf 1 page image

Set 6 Cut Out 2 in 1 Solar LightsK241 v001: 09/08/21Please read and retain these instructions for future referenceALWAYS POSITION IN DIRECT SUNLIGHTASSEMBLY INSTRUCTIONS / INSTRUCTIONS FOR USE:Unpack the components carefully. Please check all parts have been removed from the packaging.Before using first timeAllow lamp to charge for at least 8 hours in full sunlight with the ON/OFF switch in the ON position. TheON/OFF switch is located under the solar panel. Once the batteries are fully charged, set the ON/OFF switchto ON. If the lamp does not turn on after dark refer to Maintenance section.Find an ideal Place for the Solar Light.Place the solar light in an area where it will receive direct sunlight for at least 8 hours per day. The number ofhours the light will illuminate is directly proportional to the hours of sunlight it receives. If the light is placedin a shaded area, it will not be able to fully charge and its illumination time will be limited. Do not place thelight near other outdoor lighting like porch or streetlights. These may fool the sensor and keep the light fromcoming on, or cause it to turn off automaticallyTo easily insert stakes into the ground, it is recommended to wet the ground first. To avoid damaging gardenstakes when inserting into the ground, select a spot in soft, rock-free soil. Insert the base of the stake firstthen gently insert the rest of the stake into the base. DO NOT push directly against the solar cell or theornament housing containing the actual LED light.Dimensions37.5* 6.9* 6.9cm (with hook: 43cm)• 2 IN 1 FUNCTION – HANG OR STAKE• CREATES A LOVELY REFLECTIVE LIGHTPATTERN• SIZE OF LANTERN – 10.3 X 6.9 X 6.9 CM• CHARGING TIME – 8 HOURS• WARM WHITE LEDS (not replaceable)• AMORPHOUS SILICON SOLAR PANEL• OFFERS HIGHER EFFICIENCY, CAN WITHSTANDHIGHER TEMPERATURES WITHOUT OUTPUTBEING AFFECTED, PERFORMS BETTER IN LOWLIGHT CONDITIONS• LIGHTING MODE – ON / OFF / LIGHT SENSOR• WATERPROOF – IP44 RATED1*2/3AAA100 Ni-Mh – Rechargeable(included)

/ 2

Related manuals for Gainsborough K241