Gainsborough Solar Lying Angel Assembly Instructions/instructions For Use

Gainsborough Solar Lying Angel Assembly Instructions/instructions For Use Manual pdf 1 page image

Solar Lying AngelK224 v001: 08/12/21Please read and retain these instructions for future referenceALWAYS POSITION IN DIRECT SUNLIGHTASSEMBLY INSTRUCTIONS / INSTRUCTIONS FOR USE:Unpack the components carefully. Please check all parts have been removed from the packaging.OPERATIONFOR FIRST TIME USE:Step 1:Fully charge the battery before first use. Charge under direct sunlight in the position for 2 days.Step 2:Once the batteries are fully charged, set the ON/OFF switch to ON. If the lamp does not turn on after darkrefer to Maintenance section.Your solar light will automatically turn on once it gets dark.Find an ideal Place for the Solar Light.Place the solar light in an area where it will receive direct sunlight for at least 8hours per day. The solar panel is located on the back side of the angle. Thenumber of hours the light will illuminate is directly proportional to the hours ofsunlight it receives. If the light is placed in a shaded area, it will not be able to fullycharge and its illumination time will be limited. Do not place the light near otheroutdoor lighting like porch or streetlights. These may fool the sensor and keep thelight from coming on, or cause it to turn off automatically.Dimensions(H) 14 x (W) 26 x (D) 11cmMaterial: 90% Polyresin, 10% Plastic• PEACEFUL SLEEPING ANGEL WITH 3 WARM WHITE LED’SAROUND HER HEADBAND THAT AUTOMATICALLYILLUMINATE AT DUSK (LEDs not replaceable)• MADE TO LOOK LIKE STONE BUT MADE OUT OFWEATHERPROOF POLYRESIN• BUILT IN DISCREET SOLAR PANEL

/ 3

Related manuals for Gainsborough K224