User Manual Galileosky Base Block74Command formatstatallExplanationAllows obtaining device, inputs, outputs decimal status and mileage according toGPS/GLONASS data.ExampleRequest: statallReply: StatAll: Dev=1,Ins=2,Outs=7,Mileage=152;Service commandsCommand formatPIN NParametersN – four-digit PIN-code of SIM-cards.ExplanationSIM-card PIN-code and password setting for settings access in the Configurator. The defaultPIN-code is 0. If you enter the wrong code, the tracking device will be blocked for 25seconds, and then reset. PIN-code is identical for both SIM-cards.ExampleRequest: PIN 1234Reply: PIN:1234;Command formatArchive typeParameterstype – data source for sending to the server:0 – archive from the internal flash-memory;1 – archive from the microSD card.ExplanationSelection of data source for sending to the server. After command execution it is necessary toreset the tracker. Before you select a microSD card, delete the archive, created by earlierfirmwares, (EraseTrackSD or delete files from Track catalogue through the Card-Reader).ExampleRequest: ARCHIVE 0Reply: ARCHIVE:0;
