Gallagher DAIRY SCALE XDS5000 Installer Manual

Gallagher DAIRY SCALE XDS5000 Installer Manual Manual pdf 30 page image

DairyScale Installer manual 3E0673Page 26Change resolutionImportant: Use this option only under instruction from Gallagher or your supplier.To change the static weight limits and steps for the Main Weighing Platformwhile in Manual mode complete the following steps:Note: The Weighing Platform does not need to be connected while you set theresolution limits and steps.Procedure1. Access the Engineering Options menu. See Accessing the EngineeringOptions menu (p 24).2. Select the Change resolution option.3. Press the SELECT soft key.The DISPLAY RESOLUTION screen displays in the lower screen.4. Press the soft key until the value you want to alter ishighlighted.5. Alter the Limit or Step values as follows: Limit valueNote: After you select a Limit value, the labelling of the three buttonsalong the bottom of the screen changes to DIGIT , 1 and.Use the DIGIT and 1 buttons to set a limit number. The largest limit number you can input is 99999. When you press the DIGIT button repeatedly, the label on the1 button changes from 1 to 10, 100, to 1000, to 10000 andback to 1. When the label is 1, each time you press the 1 button, youadd 1 to the limit. When the label is 10000, each time you pressthe 10000 button, you add 10000 to the limit. Step valueNote: After you select a Step value, the labelling of the three buttonsalong the bottom of the screen changes to , and.