7 English3E4722 Gallagher MB150 MB300 Portable Energizer User ManualINSTALLATION INSTRUCTIONSStep 1. Mount the EnergizerMount the energizer on a post or wall, out of reach of children. Install in aplace where there is no risk of the energizer incurring mechanical damage,and where there is no risk of the leads being chewed by animals. If possible,install away from heavy electrical equipment e.g. pumps or other items thatmay cause electrical interference.Permanent InstallaƟona) Drill a single hole using a 4mm (5/32”) diameter drill for Ɵmber walls, ora suitable wall plug for brick and concrete walls. (Figure 1.)b) Fix the 32mm screw provided into the wall leaving the head of the screw3mm (1/8”) out from the wall. (Figure 2.)c) Place the energizer over and slide down onto the mounƟng screw.(Figure 3.)d) Secure energizer by fixing the 50mm screw into the wall through thehole in the handle. (Figure 4.)Figure 1 Figure 2 Figure 3 Figure 4