Gallagher W210 User Manual

Gallagher W210 User Manual Manual pdf 8 page image

3E2361 Weigh Scale W210 User Manual4Installing the loadbarsTo install the loadbars, follow these steps:Note: Fit the loadbars as per the manufacturer's instructions.1. Bolt the platform to the loadbars.2. Ensure the platform is placed on a flat and level surface. Make sure it isnot touching any rails or gates.3. Either bolt the loadbars to the concrete pad or locate them on studs setinto the concrete. This will prevent the platform from moving during theweighing session.4. Connect the loadbar cables to the Weigh Scale.Note: If you are using non Gallagher, loadbars ensure the loadbars are correctlycalibrated.Installing the Weigh ScaleThe Weigh Scale can be placed on a table top or mounted on the WeighScale bracket supplied.Position the Weigh Scale:- clear of the platform to ensure it does not interfere with the flow ofanimals during the weighing cycle- within easy reach of the loadbar leads- within easy reach of the operator (for manual weighing), and- in a well-lit area