Galleon 1K User Manual
                      | |
Contents | 
11. Important Safety WarningPlease comply with all warnings and operating instructions in this manual strictly. Save thismanual properly and read carefully the following instructions before installing the unit. Do notoperate this unit before reading through all safety information and operating instructionscarefully1-1. Transportation Please transport the UPS system only in the original package to protect against shockand impact.1-2. Preparation Condensation may occur if the UPS system is moved directly from cold to warmenvironment. The UPS system must be absolutely dry before being installed. Pleaseallow at least two hours for the UPS system to acclimate the environment. Do not install the UPS system near water or in moist environments. Do not install the UPS system where it would be exposed to direct sunlight or nearheater. Do not block ventilation holes in the UPS housing.1-3. Installation Do not connect appliances or devices which would overload the UPS system (e.g.laser printers) to the UPS output sockets. Place cables in such a way that no one can step on or trip over them. Do not connect domestic appliances such as hair dryers to UPS output sockets. The UPS can be operated by any individuals with no previous experience. Connect the UPS system only to an earthed shockproof outlet which must be easilyaccessible and close to the UPS system. Please use only VDE-tested, CE-marked mains cable (e.g. the mains cable of yourcomputer) to connect the UPS system to the building wiring outlet (shockproofoutlet). Please use only VDE-tested, CE-marked power cables to connect the loads to the UPSsystem. When installing the equipment, it should ensure that the sum of the leakage currentof the UPS and the connected devices does not exceed 3.5mA.1-4. Operation Do not disconnect the mains cable on the UPS system or the building wiring outlet(shockproof socket outlet) during operations since this would cancel the protectiveearth of the UPS system and of all connected loads. The UPS system features its own, internal current source (batteries). The UPS outputsockets or output terminals block may be electrically live even if the UPS system is notconnected to the building wiring outlet. In order to fully disconnect the UPS system, first press the OFF/Enter button todisconnect the mains. Prevent no fluids or other foreign objects from inside of the UPS system. |
Related manuals for Galleon 1.5K
manualsdatabase
Your AI-powered manual search engine