Gamma 5800 Els Owner's Manual

Also see for 5800 Els: Owner's manual Owner's manual Owner's manual

Contents

Gamma 5800 Els Owner's Manual Manual pdf 9 page image

Instructions for Power Connection and ControlsCAUTION ! Before connecting to the power supply, check the voltage sourcethat the machine is being connected to. The acceptable range of input volt-ages for this machine is between 100 V and 240 V @ 50 to 60 Hz. If you haveany questions regarding the input voltage supply for your area, please askyour electric utility company.To install the power cord, insert the female end of the power cord into the AC Adapterand then insert the female end of the cord from the AC Adapter into the A/C Power CordSocket “C” located on the back panel of the tensioner. Plug the male end of the powercord into a grounded power outlet. When using extension cords, use grounded heavyduty extension cords rated for 15 AMP service.To connect the foot pedal switch, insert the male pin at the end of the foot pedal switchcord into the Foot Pedal Switch Receptacle “B” located on the back panel of the tensioner.Switch on the machine by pressing the Lighted On-Off Power Switch on the back panel.At start-up, the LED will display a countdown from “9.0” to “0.0” while the machineperforms a self diagnostics check at start-up.8POWER CONNECTION & CONTROLSFront Panel FeaturesA - String GripperB - Tension ButtonC - Control PanelD - L.E.D. Tension DisplayBack Panel FeaturesA - Lighted Power SwitchB - A/C Power Cord SocketC - Foot Pedal Switch ReceptacleD - String Length Meter ReceptacleB CA DBWARNING! FOR INDOOR USE ONLY. TO BE USED BYADULTS OR UNDER ADULT SUPERVISION ONLY.NEVER OPEN UNIT WITH POWER CONNECTED.DA C