Gamma PROGRESSION ST Owner's Manual

Contents

Gamma PROGRESSION ST Owner's Manual Manual pdf 15 page image

14TROUBLESHOOTINGTIPSPROBLEM SOLUTIONString slips in clampsString slips in gripperString clamp winged lock knob is difficult toturnString tension too tight or too looseFor additional assistance, contact Gamma Sports Customer Service at 1-800-333-0337- Adjust gap between jaws- Clean clamp jaws- Clean gripper jaws- Adjust Gripper Jaw Stop ScrewString clamp slips on base - Clean base of clamp and top ofturntable- Check for proper position of thrustbearing in the base of the winged lockknob- Check tension using a tension calibratorand adjust machine calibration if neces-saryWith time and use, the clamping surfaces of your machine may become oily or dirty and resultin string or clamp slippage while stringing. Periodic cleaning of the following parts is recom-mended.String ClampsClean the inside gripping surfaces of the string clamp jaws by inserting a cloth or pipe cleanersoaked with isopropyl alcohol between the jaws and rub back and forth. If the build-up isexcessive, dismantle the string clamp jaws to expose the gripping surfaces by removing theadjustment screw. Using a small nylon brush, (such as a toothbrush), scrub the inside surfacesuntil all debris is removed. Clean the jaws with isopropyl alcohol and re-assemble.String Clamp BaseClean the base of the clamps and the top of the turntable with isopropyl alcohol.String GripperClean inner gripping surfaces with isopropyl acohol soaked cloth or pipe cleaner.CARE and CLEANING