Gammill Vision User Manual
                                                   | |
Contents
| 
Page 24The green arrows are used to rotate the carousel, until the desired icon is at the front. The leftgreen arrow will rotate the carousel clockwise and the right rotates it counterclockwise.Often times touching an icon will bring up a secondary screen, which presents more options foryou to choose. You don’t have to make a choice – you can return to the primaryscreen just by pressing the Exit Icon (that looks like a door).Main Screen - Carousel of Patented ApplicationsTouch the screen and get the icons to revolve. It may feel awkward at first, but you will soonappreciate the fact that you don’t have to memorize any codes or key sequences. The iconsare all in front of you! Here is a list of icons, and what they do.Stitcher ModesAbout the Stitch-regulator -There is one position on the carousel for the stitch-regulator, but four modes within the stitchregulation software. Pressing the ‘Regulate’ Icon will rotate through the choices.Regulate – means every stitch will be the same length – or as close aspossible. The encoders measure the speed and direction of the wheels andfeed the information back to the software, which calculates when to take thenext stitch. The target is to have every stitch exactly the same.Coast – means the stitch-regulator is used at higher speeds but not at thelower speeds. This allows the quilter to stitch motifs using the stitch-regulator,and then slow down to do micro-stitching without the regulator (constantspeed). This eliminates the need to stop and turn off the regulator whenmoving from the designs to the backgrounds or detail work.YourTurnCoastPress Regulateto change toConstantPress Coastto change toPress Constantto change toBaste RegulatedPress Basteto return toMain ScreenThe Main Screen starts with the Regulate icon in front.The icon in the front determines how the stitcher will respond.• To change the mode, press the icon once, and the nextstitch mode will be presented.• Repeat until the desired mode appears.Go ahead and try turning the carousel.Touch the green arrow to move thecarousel counterclockwise as you readthe following section.YourTurn |
Related manuals for Gammill Vision
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine