Ganz YCH-03Am Instruction Manual

Contents

Ganz YCH-03Am Instruction Manual Manual pdf 4 page image

EG-44 MIST mode switchSTD : Standard setting for MIST. Thepreset conditions are applied toON/OFF control and correctioneffects of the MIST function.AUTO: Select this mode when imagecontrast is over-corrected in“STD” of the MIST mode. Undernormal conditions, AUTO doesnot function at all or just functionsto correct the image contrastslightly. However, when the imagecontrast deteriorates due to anenvironmental change, the MISTautomatically adjusts the correctioneffects.Cautionsx In “AUTO” of the MIST mode, an object’senvironmental information obtained fromcamera images is made into data and thenstored and analyzed for ON/OFF controlof MIST operation as well as for correctioneffect adjustment according to the object’senvironment.x The data stored in the camera will bedeleted if the MIST mode is switched from“AUTO” to “STD”.1 Flange back adjustment wheelIf the focus needs to be adjusted after thelens has been mounted, loosen the flangeback locking screw (bl) and rotate theadjustment wheel to adjust.2 DC iris level adjust POTAdjust DC auto-iris level manually.Easy Focus adjustmentBe sure to adjust the lens focus only in a well-lit environment. When using a DC iris lens,set the auto-iris mode switch (bm) to AES, andthen make the focus adjustment. After theadjustment, be sure to return switch (bm) toDC.3 MIST function switchFor turning on and off the MIST functionwhich corrects low image contrast.ON : Activates the MIST function.OFF : Disables the MIST function.ÍÉÓÔ ÏÎ ÍÉÓÔ ÏÆÆPART NAMES AND FUNCTIONSAC24VCLASS2ONLY+12VDC GNDSEEINSTRUCTIONMANUALVIDEOMIST ON AUTO-IRISLEVEL AESVIDEOIRISLOCKSTDOFFBLCFLCD D/NDCAUTOHIAC24V GNDCLASS2ONLY+12VDC B/W-FIX GNDVIDEOMIST ONAUTO AUTO-IRISDC AESVIDEOIRISLOCKSTDOFFBLCFLCATWAWBLEVELHIZC-NH258NmYCH-03Am