Ganz ZC-PT SERIES Installation Manual

Also see for ZC-PT series: Installation guide User manual Installation guide User manual User manual

Ganz ZC-PT SERIES Installation Manual Manual pdf 45 page image

Installation Guide444.6.2 Pole Thin/Wide Box MountingItems Needed:• Dome Camera• Data Cable (supplied)• Ethernet Cable (IP Dome Camera)• Standard/Compact Pendent Mount and equipped items (optionalaccessory)• Pole Thin/Wide Box Mounting (optional accessory)• Indoor Mount Adapter (optional accessory)• Stainless Steel Straps for fixing the Pole Thin/Wide Box Mounting (optionalaccessory)Tools Needed:• Stainless Strap Cutter• Tool for screwingFollow the steps below to mount the Dome Camera with the Pole Thin/WideBox and Standard/Compact Pendent Mount.1) Fasten the Pole Thin/Wide Box on a pole with equipped stainless straps.2) Run the cable(s) through the hole on the Pole Thin/Wide Box Mountingwith the Data Cable’s 22-pin cable coming out.3) Fasten the Standard/Compact Pendent Mount onto the Pole Thin/WideBox Mounting with the supplied screws and washers. Then thread thecable(s) through the Standard/Compact Pendent Mount with the cable(s)coming out of the Pendent Mount’s outlet.NOTE: Please block the cable entry hole with the supplied spongeto avoid insects entering the Pendent Mount. See the illustrationsin section 4.4.1 Compact Pendent Mount > Step 4.4) Thread the cable(s) through the Indoor Mount Adapter and join the IndoorMount Adapter to the Standard/Compact Pendent Mount with the suppliedscrews and washers.5) Connect the cable(s) to the Dome Camera.6) Attach the Dome Camera to the Indoor Mount Adapter, aligning theadjustable screw of the Plastic Fixing Plate with the mating screw hole onthe Indoor Mount Adapter, and screw them tightly. See section 4.3.2Straight Tube for illustrations.