Ganz ZC-PT Series Installation Manual

Also see for ZC-PT series: User manual Installation guide User manual User manual Installation guide

Ganz ZC-PT Series Installation Manual Manual pdf 52 page image

Installation Guide514.5 Corner Mount4.5.1 Standard/Mini Corner Mounting Plate (ZCA-CST/MCP) Indoor PTZ Camera:Items Needed• PTZ Camera• Data Cable (supplied)• Standard/Mini Pendent Mount and equipped items (optional accessory)• Standard/Mini Corner Mounting Plate (herein collectively called “CornerMounting Plate”; optional accessory)• Indoor Mount Kit (optional accessory)• Waterproof Rubber (Indoor Mount Kit’s accessory)• Screws and Screw Anchors for fixing the Corner Mounting Plate (notsupplied)Tools Needed• Tool for drilling• Tool for screwingFollow the steps below to mount the PTZ Camera with the Corner Mounting Plateand Standard/Mini Pendent Mount.1) Make a cable entry hole on the wall to recess the cable(s).2) Fix the Corner Mounting Plate on the corner of the wall with proper screws andscrew anchors. Then run the cable(s) through the hole on the Corner MountingPlate with the Data Cable’s 22-pin cable coming out.3) Fasten the Standard/Mini Pendent Mount onto the Corner Mounting Plate withthe supplied screws and washers. Then thread the cable(s) through theStandard/Mini Pendent Mount with the cable(s) coming out of the PendentMount’s outlet.NOTE: Please block the cable entry hole with the supplied sponge toavoid insects entering the Pendent Mount. See the illustrations in section4.4.1 Compact Pendent Mount > Step 4.4) Attach the Waterproof Rubber to the Standard/Mini Pendent Mount.5) Thread the cable(s) through the Indoor Mount Kit and join the Indoor Mount Kit tothe Standard/Mini Pendent Mount with the supplied screws and washers. Thenadjust the Waterproof Rubber to the joint.6) Connect the cable(s) to the PTZ Camera.7) Join the PTZ Camera to the Indoor Mount Kit with the supplied screw and