Ganz ZC-PT Series User Manual

Also see for ZC-PT series: Installation guide User manual Installation guide User manual Installation guide

Ganz ZC-PT Series User Manual Manual pdf 53 page image

User’s Manual523.3.19 ALARM DETECTWhen the alarm detect function is activated, the camera will detect movement withina monitoring area and then send an alarm signal automatically. There will be a flashwarning notice: MOTION displayed in the upper left corner of the screen.18x/26x Model:• DETECT SWITCHThe item is used to enable or disable the ALARM DETECT function.• DETECT MODEFour alarm detect modes are provided for different application.INT FOCUS (Internal Focus)The alarm will be triggered if the internal focus changes; if the focus returnsto the original position, the alarm will stop.FIX FOCUSIf focus movement is detected, the alarm will be triggered, and the alarmstops when focus returns to the original position. If the detected focusmovement keeps changing for more than four seconds, the new focusposition will be memorized as the reference, and the alarm will stop.NOTE: The INT FOCUS and FIX FOCUS detect modes will beactivated only with the Auto Focus mode.INT AE (Internal AE)When Auto Exposure (AE) movement is detected, the alarm will be triggered;if the Exposure Level returns to the original level, the alarm will stop.FIX AEThe alarm will be triggered if the Exposure value changes; if the adjusted AEvalue retains for four seconds, the value will be saved as the reference, andthe alarm will stop.ALARM DETECTDETECT SWITCH OFFDETECT MODE NONEBLOCK MODE NONEFRAME SET NONEFRAME DISABLE NONETHRESHOLD NONEEXIT YES