Ganz ZC-PT series User Manual

Also see for ZC-PT series: Installation guide User manual Installation guide User manual User manual

Ganz ZC-PT series User Manual Manual pdf 32 page image

User’s Manual313.3.12 ALARM SETTNGThe PTZ camera provides eight alarm inputs and two alarm outputs (N.O. and N.C)to connect alarm devices. This function enables the PTZ camera to work inconjunction with an alarm system to capture images of a particular event. For wiringdetails, please refer to the installation guide and/or qualified service personnel.Alarm parameters can be set on this page.• ALARM PINThe PTZ camera provides eight alarm inputs and two outputs (1 x N.O. and 1x N.C). Select an alarm connection for which you want to use this option toset alarm-related parameters and then set those parameters in the AlarmSetting menu. For alarm pin definitions, refer to section 2.6 Alarm PinDefinition or the installation guide.• ALARM SWITCHThis option is used to enable or disable the selected alarm pin function. Usethe left/right direction keys on the control keyboard to change the setting.• ALARM TYPEThere are two alarm types: Normally open and Normally closed, which areillustrated below. Select an alarm type that corresponds to the alarmapplication.• ALARM ACTIONSelect one of these modes to choose the actions to be performed when analarm is triggered. The alarm actions can be set to execute the preset position,ALARM SETTINGALARM PIN 1ALARM SWITCH OFFALARM TYPE N.C.ALARM ACTION PRESETPRESET POINT 001DWELL TIME ALWAYEXIT YES