Gardena 380 LI Operating Instructions Manual

Also see for 380 LI: Operating instructions Operating instructions Operating instructions Operating instructions

Contents

15GBAssembling the handle :3. Assembly1. Insert lower part of bottom upright 1into upright holders 2 up to stop andsecure with the screws 3.2. Push connector 4 from underneathinto upper part of bottom upright 1.3. Insert threaded rod 6 from left throughlower parts of central upright 5,upper part of bottom upright 1 andconnector 4 right up to the stop.4. Slide threaded bearing 8 intoclamping lever 7.5. Screw clamping lever 7 ontothreaded rod 6 approx. 4 turns.6. Move clamping lever 7 ontoconnector 4 and check whetherclamping lever 7 locks.7. If clamping lever 7 does not yetlock, screw another turn ontothreaded rod 6. Repeat procedureuntil clamping lever 7 locks onconnector 4.8. Push the screws 9 through theupper handle 0 and the middlehandle sections 5 and secure withthe 2 wing nuts A.The safety lock Bof the handles 0must beon the right in the direction of travel.9. Fix the motor cable C to the handle with the two cableclips D.4. FunctionTo produce a well-maintained lawn we recommend cutting thelawn once a week if possible. The lawn becomes thicker if cutfrequently.Relatively long cut grass (> 1 cm) must be removed so that thelawn does not become yellow and matted.After relatively long intervals between mowing (holiday lawn), upto max. 12 cm, first of all cut in one direction with the cutting heightas high as possible, then cut in the crosswise direction at thecutting height required.Storage :The cylinder lawnmower and the Accu must notbe stored at more than 45 °C or when exposedto direct sunlight.Ideally, the Accu should be stored below25 °C.Mowing correctly :787945B06CD9D1A67741 23