Gardena AccuCut Li 9851-20 Operation Instructions Manual

Also see for AccuCut Li 9851-20: Operation instructions

Contents

Gardena AccuCut Li 9851-20 Operation Instructions Manual Manual pdf 9 page image

3451. Connect charging cable 3 to the jack 4 of the Battery Shear.2. Connect battery charger 5 to an electrical socket.During charging, the jack 4 flashes green. The battery is charged.When the jack 4 lights up green, the battery is fully charged.Check the charge status regularly while charging.3. First pull the charging cable 3 out of the jack 4 and then unplug the batterycharger from the electrical socket.When there is a sharp fall in the power of the battery, the unit switches off and thebattery needs to be charged.3. OPERATIONTo start the Shrub Shear: DANGER! Risk of physical injury!Risk of injury if the unit does not stop when you release the startbutton.v Do not bypass the safety devices or switches. For example do not attachthe starting lock-out 6 or start button 7 to the handle.GB9