Gardena EasyCut Li-18/23 R Operating Instructions Manual

Also see for ComfortCut 9825: Operating instructions Operating instructions User manual

Contents

ö 30lkqßA1 ßA27. Only for art. 9825: Place both halves of the impeller k aroundthe lower groove l of the trimmer head 3 and close until theyaudibly engage.8. From the front, push the plant guard ö into the uppergroove 0 of the trimmer head 3. In doing so, ensure thatthe impeller k can rotate freely (i.e. insert the bow withthe kink pointing upwards).9. Place the protective cover q on top of the trimmer head 3.10. Turn the protective cover q until it can be pushed over thetrimmer head entirely (the two arrows ßA1 , ßA2 are directly acrossfrom each other).11. Rotate the protective cover q anti-clockwise until it audiblyengages.12. Slightly widen the magazine w at the open point and slide ontothe shaft 2.13. Slide up to 6 plastic blades e into the magazine w until theblades clamp into place.6 plastic blades and a magazine for spare blades are included inthe delivery. Up to 6 spare blades can be stored in the magazine.For information regarding the assembly of the blade intothe blade holders, please consult 7. Troubleshooting“Replacing the plastic blade”.3. Initial OperationCharging the battery: WARNING!Overvoltage damages batteries and the batterycharger.v Ensure the correct mains voltage.Before using for the first time, the battery must be fully charged.Charging time (for uncharged battery) see 9. Technical Data.The lithium-ion battery can be charged in any state of charge,and the charging process can be interrupted at any time withoutharming the battery (no memory effect).17EN