5-15. SPECIFICATIONS5.1 Electrical and Optical Specifications (All Specifications over entire Operating Temperature Range)Multimode 5843HRT 5844HRTOptical Budget Typical 19.5 dB 19.5 dBOutput power Typical -10.5 dBm peak -10.5 dBm peakReceiver Sensitivity Typical -30 dBm peak -30 dBm peak(62.5/125 Multimode) (62.5/125 Multimode)Wavelength 850nm 850nmConnector Type ST STCompatible Fiber Type Multimode (50-200μm) Multimode (50-200μm)Configuration (Switches) DTE/DCE DTE/DCEAC/DC Coupled AC/DC CoupledLink/Repeat Link/RepeatPin 8 Drive Current Pin 8 Drive CurrentPin 6 +5 V (DSR or CTS pull-up) Pin 6 +5 V (DSR or CTS pull-up)Diagnostic Mode Diagnostic ModeData Rate DC to 250K bps DC to 250K bpsData Transmission Asynchronous, simplex Asynchronous, simplexor Full Duplex or Full DuplexTransmission Distance up to 5000 meters up to 5000 meters(62.5/125 Cable@3dB/km) (62.5/125 Cable@3dB/km)Bit Error Rate 10-E9 Max. 10-E9 Max.Point to Point Latency 4 μ sec Max 4 μ sec MaxRepeat Latency 400 nsec Max 400 nsec MaxElectrical ParametersInputsI/O Data Format EIA RS232; CCITT v24 EIA RS232; CCITT v24Data Connector 9 pin D-Type Female 9 pin D-Type FemaleInput Impedance >3000Ohms >3000OhmsInput Voltage +/- 30 Volts Max +/- 30 Volts MaxOutputsOutput Impedance >300 Ohms >300 OhmsDriver Output +/- 5 V min into 3000 Ohms +/- 5 V min into 3000 OhmsPin 8 Output 0 to 5V 0 to 5V67 or 207 OhmSource Impedance67 or 207 OhmSource ImpedanceAmbient TemperatureOperating Temperatures -40 to +85 C -40 to +85 CStorage Temperature -40 to +85 C -40 to +85 CPower Required 3.0 Watts 4.0 Watts250 mA @ 12V 35 mA @ 90-250 V (-H)250 mA @ 24-48 V (-L)Power Dissipation BTU/H 8.2 BTU 10.9 BTUWeight 9 Ozs. 17 Ozs.Dimensions Inches 2.0W X 5.1L X 1.3H 4.1W X 5.1L X 1.3HIndicators Power PowerTransmit Fiber Transmit FiberTransmit Electrical Transmit ElectricalReceive Fiber Receive FiberReceive Electrical Receive ElectricalAll Specifications are subject to change without notice.