Part Number 4532415 Rev 5 12/15 33Section 2 InstallationINSTALLING THE MOUNTING FRAME, GLASS AND COIL CARRIERIIMPORTANT: Factory supplied frames are intended for installations on counter-tops 1.5mm to 3mm thick [16- to10-gauge].NOTE: For counter-top thickness of 20mm to 30mm [1”] or stone countertop installation, please contact Factory forassistance.PartitionWhen installing two coil carrier sheets on the same frame, you must install a non-magnetic steel partition plate inbetween them. This plate isolates the magnetic fields and prevents the fields from interfering each other.Order of Installation1. Mounting frame2. Silicone gaskets3. Glass-top4. Coil carrier sheetNOTE: Coil and sensor assembly will be compressed by about 5mm after installation.1234 55mm50mm+/- 2mm
