Garland MWE-9501 Programming Manual

Also see for MWE-9501: Operation manual STEPS FOR PROGRAMMING RECOVERY CLEANING

Contents

control programming

Garland MWE-9501 Programming Manual Manual pdf 1 page image

Enter Programming1. PRESS and HOLD the buttonfor approximately 3-5 seconds. Thecontroller will display the controlmodel number and the current versionEprom Chip.Disable Multi Gap Cooking2. PRESS the button 2x. Thecontroller will display “SYSTEM SETUP”.3. PRESS the button until the controldisplays “MULTI GAP (Yes/No)” - Ifcontrol displays “NO”, move to step 6.4. PRESS and HOLD the button untilthe “YES” begins to flash.5. PRESS the button to change theMULTI GAP setting to “NO”.6. PRESS the button 2x. Thecontroller will display “MENU ITEMS”.Remove menu items from menu library7. PRESS the button until “FOLDEDEGGS - FLAT - YES” appears in thedisplay.CONTROL PROGRAMMING8. PRESS the button to change the“YES” to “NO”.9. PRESS the button until “ROUNDEGGS - FLAT - YES” appears in thedisplay.10. PRESS the button to change the“YES” to “NO”.Change settings for current menu items 10:1, 4:1, Sausage, GrilledChicken, Bacon, Angus, Mushrooms & McRib.11. PRESS the button 2x. Thecontroller will display “SYSTEM SETUP”.12. PRESS and HOLD the button until“GAP CALIBRATION” appears in thedisplay.13. PRESS the button 2x. Thecontroller will display “MENU ITEMS”.14. PRESS the button to select “10:1 -CLAM YES”.15. PRESS the button until “REMOVETIME - ###” is displayed.16. Using the and button, changethe old setting to the new setting.17. PRESS the button until “GAPSETTING - ###” is displayed.18. Using the and button, changethe old setting to the new setting.FOR USE WITH MODELS MWE-9501 / MWG-9501PAGE 1 9501ProgrammingNew.inddLast Updated (081310)GC 450 V 7.3#SYSTEM SETUPSYSTEM SETUPGAP CALIBRATIONMENU ITEMS10:1 CLAM YESREMOVE IN ###REMOVE IN ###GAP SETTING ###GAP SETTING ###MULTI GAP - YESMENU ITEMSFOLDED EGGS-FLAT YESFOLDED EGGS-FLAT NOROUND EGGS-FLAT YESROUND EGGS-FLAT NOMULTI GAP - YESMULTI GAP - NOThe following procedures should be followed in sequence. Ifyou have trouble following the steps listed below, you canconsult your operations manual. A downloadable copy ofthe Operations manual containing additional programminginstruction can be found at https://clamshell.garland-group.com/literature.asp.1. Enter Programming - Enter the program mode.2. Disable Multi Gap Cooking - Not used anymore.3. Remove existing menu items from library - RemoveFolded Eggs & Round Eggs (FLAT) from library, these itemswill be reprogrammed as CLAM menu items.4. Change settings for the remaining menu items in library- Change existing menu items to the new programmedsettings.5. Program new menu items into library - Reprogram Eggproducts into CLAM menu items.

/ 2

Related manuals for Garland MWE-9501