Garland MWGH-9501 Operation Manual

Also see for MWG-9501: Programming manual STEPS FOR PROGRAMMING RECOVERY CLEANING

Garland MWGH-9501 Operation Manual Manual pdf 1 page image

GRILLSMODEL MWG-9501MODEL MWGH-9501MODEL MWGF-9501MODEL MWGFH-9501MODEL MWGL-9501MODEL MWGR-9501OPERATIONS MANUALMANUFACTURED EXCLUSIVELY FORMcDONALD'SBYGARLAND COMMERCIAL INDUSTRIES, INC.185 EAST SOUTH STREETFREELAND, PENNSYLVANIA 18224TOLL FREE: (800) 446-8367PHONE: (570) 636-1000FAX: (570) 636-9874E-mail: clamshell@garland-group.comNOTE: This manual pertains to both clam grill and flat grill models. The reader/operator must interpret its contents to applicable needs. However,if there is any question of interpretation of any literature pertaining to Garland grills, please contact our Customer Service Department atone of the phone numbers listed above.FOR YOUR SAFETYDO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLEVAPORS OR LIQUIDS IN THE VICINITY OF THIS OR ANYOTHER APPLIANCE.WARNING:IMPROPER INSTALLATION, ADJUSTMENT, ALTERATION,SERVICE OR MAINTENANCE CAN CAUSE PROPERTYDAMAGE, INJURY OR DEATH. READ THE INSTALLATION,OPERATING AND MAINTENANCE INSTRUCTIONSTHOROUGHLY BEFORE INSTALLING OR SERVICING THISEQUIPMENT.KEEP APPLIANCE AREA FREE AND CLEAR FROM COMBUSTIBLES!PLEASE READ ALL SECTIONS OF THIS MANUAL AND RETAIN FOR FUTURE REFERENCE.THIS PRODUCT HAS BEEN CERTIFIED AS COMMERCIAL COOKING EQUIPMENT AND MUST BE INSTALLED BY PROFESSIONALPERSONNEL AS SPECIFIED.ALL BURNER ADJUSTEMENTS AND SETTINGS MUST BE MADE BY A QUALIFIED GAS TECHNICIAN.NOTE: Unit must be installed with no less than six inches (6") clearance from combustible construction at both sides andrear.FOR YOUR SAFETY: Post in a prominent location, instructions to be followed in the event the user smells gas. This information shall beobtained by consulting your local gas supplier.CAUTION: THIS EQUIPMENT MUST ONLY BE OPERATED UNDER AN APPROVED HOOD SYSTEMTHIS EQUIPMENT “MUST” BE INSTALLED AND COMMISSIONED BY A PROFESSIONALFACTORY TRAINED TECHNICIAN0049Part # 1382684 Rev. 4CE ConfigurationPrinted in the U.S.A.(03/99)