Garland MWE3W Installation And Operation Manual

Also see for MWE3W: Cleaning guide STEPS FOR PROGRAMMING GRILL RECOVERY CLEANING Programming instructions Programming Instruction Installation and operation manual

Contents

PART #4521777 (03/19/08)GARLAND ELECTRIC CLAMSHELL GRILL WITH PRODUCT RECOGNITION MODEL MWE3W INSTALLATION/OPERATION MANUALPage 21CONTROL PROGRAMMING (continued)To change the grill upper platen set point temperatureNOTE: Grill temperature set points are preset in the controller to thecurrently required standard. You should not change this set point to anytemperature other than what is shown on page 24.1. Using the or button, select the menu item thatrequires a temperature change.2. PRESS and HOLD the button for approximately 3seconds. Controller will display previously selectedmenu item and its corresponding item number.3. PRESS the button. The controller will display“Product”.4. PRESS the or button until “Platen SetPt” isdisplayed on the controller.5. PRESS the button. The “PLATEN SET POINT” willbegin to flash.6. Using the or button, change the temperature setpoint to the new desired temperature.7. PRESS the button to save the new temperature.8. PRESS the 2X to return to normal operating mode.To Change the MUST REMOVE IN time1. Using the or button, select the menu item thatrequires a cook time change.2. PRESS and HOLD the button for approximately 3seconds. Controller will display previously selectedmenu item and its corresponding item number.3. PRESS the button. The controller will display“Product”.4. PRESS the or button until “Must Remove In” isdisplayed on the controller.5. PRESS the button. The seconds will begin to flash.6. Using the or arrow buttons to change the MustRemove In time to the new desired time.7. PRESS the button to save the new time.8. PRESS the 2X to return to normal operating mode.To Change the Toast Buns time1. Using the or button, select the menu item thatrequires a cook time change.2. PRESS and HOLD the button for approximately 3seconds. Controller will display previously selectedmenu item and its corresponding item number.3. PRESS the button. The controller will display“Product”.4. PRESS the or button until “Toast Buns Time” isdisplayed on the controller.5. PRESS the button. The seconds will begin to flash.6. Using the or button, change the Toast Buns Timeto the new desired time.7. PRESS the button to save the new time.8. PRESS the 2X to exit and return to normal operatingmode.To Change the Toast Buns Alarm (Auto / Manual)1. Using the or arrow buttons, select the menu itemthat requires a cook time change.2. PRESS and HOLD the button for approximately 3seconds. Controller will display previously selectedmenu item and its corresponding item number.3. PRESS the button. The controller will display“Product”.4. PRESS the or button until “Toast Buns Alarm” isdisplayed on the controller.5. PRESS the button. The “AUTO” or “MANUAL” willbegin to flash.6. Using the or arrow buttons to change the“MANUAL” to “AUTO” or “AUTO” to “MANUAL”.7. PRESS the button to save the new setting.8. PRESS the 2X to exit and return to normal operatingmode.