Garland moisture+ MP-GD-10-S Service Manual

Contents

Garland moisture+ MP-GD-10-S Service Manual Manual pdf 23 page image

Part # MPSM07 (03/24/08) Page 23Programming Recipe KeysFor “one touch” cooking, each of the numeric keys, (1 through9), on the keypad can be programmed to contain a productrecipe consisting of 1 to 6 “profiles ” Each profile consists ofa set of cooking parameters which control that profile’s fanspeed, cook temperature, cook time and moisture settingsTo program a recipe key:1 Press and hold the Program key for 3 seconds The displaywill indicate ENTER CODE Here, a pass code must beentered This security feature prevents unauthorizedpersons from changing recipe parameters2 Use the numeric keys to enter 4 - 2 - 7 - 5 Then press theY/Enter key3 Press the N/Scroll key to select recipe or systemprogramming4 The display will indicate PRESS KEY TO PROGRAM Choosethe desired numeric key to which the new recipe will beassigned, and press that keyPress the Y/Enter key The display will indicate PROGRAMSHELF Press the N/Scroll key5 The display will indicate PROGRAM FAN PROF1 SPEEDPress the N/Scroll key repeatedly to step through theavailable fan speed choices, (HIGH, LOW, PULSE), until thedesired speed for Profile 1 is displayed6 Press the Y/Enter key The fan setting will be stored andthe display will indicate PROGRAM PROF1 COOK TEMP Usethe numeric keys to enter the desired cook temperatureEnter a number between 150 and 500, (factory default is350) If a number outside this range is entered, the controlwill sound an error tone and reset to the closest allowablenumber within the range7 Press the Y/Enter key This stores and implements theProfile 1 temperature setting The display will indicatePROGRAM PROF1 COOK TIME Use the numeric keys toenter the desired cooking time in hours, minutes andsecondsEach time a key is pressed, the numbers displayed moveone position left It may be necessary to enter zeros firstto attain the desired result, for instance, to enter a timeof 30 minutes, press, 0 - 0, (hours), 3 - 0, (minutes), 0 - 0,(seconds), resulting in a timer display of “00:30:00 ”8 Press the Y/Enter key This stores and implements theProfile 1 Cook time setting The display will indicatePROGRAM PROF1 MOISTUREPress the N/Scroll key repeatedly to step through theavailable moisture setting choices until the desired settingis displayed Moisture setting presets for Meat, Bread,Poultry, Fish and None are included, along with a Usersetting to allow for custom moisture settings See “UserMoisture Settings,” on page 26 for more information9 Press the Y/Enter key This stores and implements theProfile 1 moisture setting The display will indicateCONTINUE Y/N10 To continue on to Profile 2 of the recipe, press the Y/Enterkey and enter cooking parameters for Profile 2 as done forprofile 1 in steps 4 through 9 Up to 6 full profiles may beentered in this way for a single recipeTo end cook cycle programming of a recipe after any ofprofiles 1 through 6 has been entered, choose NO at theCONTINUE prompt by pressing the N/Scroll key11 The display will indicate PROGRAM HOLD Y/N Press theY/Enter key if a Hold cycle is desired for the recipe, orN/Scroll if a Hold cycle is not desired12 If NO was chosen in step 10, skip directly to step 12If YES was chosen in step 11, the display will indicatePROGRAM HOLD TEMP Use the numeric keys to enter thedesired Hold temperatureEnter a number between 140 and 210, (factory default is160) If a number outside this range is entered, the controlwill sound an error tone and reset to the closest allowablenumber within the range If a new Hold temperatureis not entered, the control will use the most recentlyprogrammed Hold temperaturePress the Y/Enter key This stores and implements the Holdtemperature setting13 The display will indicate CONTINUE Y/N To end recipe keyprogramming, press the N/Scroll keyTo program another recipe key, press the Y/Enter key andrepeat the procedure, beginning with step 3System Program OptionsTo change the system setting, follow steps 1 & 2 above, usetheN/Scroll key to select system programing and press Y/Enter tobeginProgram options are:Manual Bake ON/OFFLight Mode ON/OFFReady Band ON/OFFFlexible or Straight Time Select