Garmin 128 Owner's Manual

Also see for GPS 126: Specifications

Zooming, Panning, & Pointing (continuedTo go to a waypoint highlighted on the map:1. Press the G key.The GOTO waypoint page willappear with the waypoint’s name highlighted.2. Press the F key to confirm.To stop panning and display present position:1. Press the Q key.Using the Cursor to Mark and GOTO WaypointsDuring panning, the crosshair represents a targetposition right on the moving map, with the range andbearing to the target at the top corners of the screen.To mark the target crosshair as a waypoint:1. Press the F key to capture the position. Theoption menu will appear.2. Select ‘MAP POSITION’ and press F.3. Enter a new name, symbol, etc., and press F.You can also use the target crosshair as an instantGOTO destination. This function will mark andinstantly set a course for a new waypoint called ‘MAP’.To GOTO the target crosshair:1. Press the G key to capture the position.2. Press the F key to confirm the MAP GOTO.To save the MAP waypoint, rename it, as it will beoverwritten the next time a map GOTO is executed. 39You may custom tailor theMap Page to show way-points by any of threeoptions.REFERENCEUsing theCursorMarking a CursorPositionTo mark a new waypointwith the crosshair, simplypan to the desired positionand press the ENTER key.Select the appropriatemenu option and pressENTER again.