10 Thru-Hull Intelliducer Installation InstructionsStep 5�: �pdate Your Chartplotter: �pdate Your ChartplotterIf you are using the Intelliducer with an existing Garmin chartplotter, upgrade your Garminchartplotter with the latest software to ensure compatibility with the Intelliducer. For moreinformation, visit www.garmin.com.MaintenanceYou must regularly maintain and clean your Intelliducer to get the best results.Antifouling paintIf you are using the Intelliducer in salt water, you must coat the submerged surface of theIntelliducer with antifouling paint. Use only water-based antifouling paint, because other paintsmay damage the Intelliducer. Re-apply the paint at the beginning of each season.CleaningClean the submerged surface of the Intelliducer regularly to keep it clear of aquatic growth. Theperformance of the Intelliducer will be greatly reduced if the surface collects a large amount ofgrowth. Use a scour pad (lightly) and a mild detergent to clean the surface. Avoid scratching thesurface as much as possible.SpecificationsPhysicalunit Dimensions: 4 19/32 in. (116.3 mm) L × 4 in. (101.4 mm) W × 3 in. (76.2 mm) DWeight: 13 oz. (364 g)Cables: NMEA 2000 drop cable — 19 ft. 8 in. (6 m)NMEA 0183 power/data cable — 29 ft. 6 in. (9 m)temperature range: From -15°C to 33°C (from 5°F to 91°F)Case Material: PC/PBT and ASA plasticPowerPower input source: NMEA 2000 — 9–16 VdcNMEA 0183 — 9–33 VdcFuse (NMeA 0183): 2 AMain power usage: 2 W maxNMeA 2000 Load equivalency Number (LeN): 4SonarPower: 150 W (RMS), 1,200 W (peak-to-peak)Frequency: 160 kHzDepth: 900 ft. (275 m) (Depth capacity is dependent on water salinity, bottomtype, and other water conditions.)