Garmin 190-01098-00 Owner's Manual

Garmin 190-01098-00 Owner's Manual Manual pdf 12 page image

6 VHF 300 Series Owner’s ManualBasic OperationTo remove the saved status from a channel:1. Select SCAN.2. Turn the Channel knob to access different channels.3. Select SAV CH.Scanning Saved Channels1. Select SCAN.2. Select SAVED.NOTE: This scan does not include Channel 16 unless you saved Channel 16 to memory.However, you can select +CH16 to scan Channel 16 every other channel (for example: 21,16, 32, 16). When this setting is active, the soft key displays -16. Select -CH16 to scan yoursaved channels in their normal order (for example, 08, 10, 11, 14).Repeating the Last Received CommunicationWhen repeat is turned on, the radio records up to the last 90 seconds of the last receivedtransmission. When repeat is turned off, recording is disabled; the radio plays back the lastsaved transmission from when repeat was on. During playback, the radio does not receivetransmissions on the current channel.The radio will not save the beginning (less than one second) of each received transmission.This prevents intermittent RF noise from overriding audio transmissions that have beenreceived and savedTo turn repeat on or off:1. Select REPEAT. The radio plays back up to the last 90 seconds of the last receivedtransmission.2. Select ON or OFF.To repeat the last received transmission:1. Select REPEAT. The radio plays back up to the last 90 seconds of the last receivedtransmission.2. Select REPEAT again to play the message from the beginning.Monitoring Multiple ChannelsIMPORTANT: The radio disables multiple-channel monitoring (Dual watch and Tri watch)if you turn on ATIS. See page 12.Use the Watch feature to monitor priority channels and the currently selected channel forbroadcasting activity. Channel 16 is the first-priority channel on your radio. Channel 9 is thedefault second-priority channel, but you can select another channel as your second-prioritychannel. For more information on reprogramming the second-priority channel, see page 7.